Beāte Banga
M.sc.
Former EDI research assistant
Beāte Banga received professional Bachelor Degree in Medical Physics and Engineer Qualification of Physical Technologies in Medicine from the Riga Technical University (RTU) in 2021. She continued her studies at RTU and received professional Master Degree in Medical Physics in 2022. She is currently continuing her studies at RTU and is planning to obtain Ph.D. in medical engineering.
After going on mobility program to the Technical Uniersity of Graz in Austria Beāte found interest in the development of new technologies and joined EDI in 2019. Her current research interests include human biomechanics and motion capture systems.
Projects
4 results
- Smart Materials, Photonics, Technologies, and Engineering Ecosystem (MOTE) 01.01.2023 – 31.12.2024 Completed
- Towards an ecologically valid symbiosis of BCI and head-mounted VR displays: focus on collaborative post-stroke neurorehabilitation (ReHaB) 01.01.2022 – 31.12.2024 Completed
- Sensorial Clothes for Accurate Physical Exercise and Instant Feedback (SCAPE-IF) 01.04.2020 – 30.09.2022 Completed
- Frictionless Energy Efficient Convergent Wearables For Healthcare and Lifestyle Applications (CONVERGENCE) 01.04.2017 – 31.03.2020 Completed
Publications
- 2023
Method for Muscle Fatigue Detection Using Inertial Sensors(opens in a new window)
Banga, B., Katashev, A., Greitāns, M.
In Nordic-Baltic Conference on Biomedical Engineering and Medical Physics. 2023., Vol. 89, p. 25-32, Springer
Abstract
Muscle fatigue is a common symptom that many people experience and is associated with difficulties in voluntary movement, which can lead to injuries. Currently, surface electromyography (sEMG) is considered the gold standard for muscle fatigue estimation, but its accuracy can be impacted by various factors. Therefore, new methods, such as the use of inertial sensors (IMU), are being introduced. This study aimed to explore the relationship between muscle fatigue and biomechanical parameters using inertial sensors and sEMG as a validation tool. Four participants performed an elbow flexion exercise, and the data from IMU sensor nodes and sEMG were collected. The results showed that there were correlations between the electrical activity of m. biceps brachii and rotation angles of the forearm and upper arm. Additionally, an increase in motion amplitude deviation was found to be a potential indicator of muscle fatigue. These findings suggest that inertial sensors can be used as an alternative to sEMG for detecting muscle fatigue, which has potential implications for injury prevention and rehabilitation. However, further research with a larger sample size is needed to validate these findings.
Indexed in Scopus / WoS · Scopus percentile: 21
- 2022
Methods for Explaining CNN-Based BCI: A Survey of Recent Application(opens in a new window)
Maksims Ivanovs; Beate Banga; Valters Abolins; Krisjanis Nesenbergs
2022 IEEE 16th International Scientific Conference on Informatics (Informatics), IEEE
Abstract
Convolutional neural networks (CNN) have achieved state-of-the-art results in many Brain-Computer Interface (BCI) tasks, yet their applications in real-world scenarios and attempts at further optimizing them may be hindered by their non-transparent, black box-like nature. While there has been ex-tensive research on the intersection of the fields of explainable artificial intelligence (AI) and computer vision on explaining CNN for image classification, it is an open question how commonly the methods for explaining CNNs are used when CNNs are a part of a BCI setup. In the present study, we survey BCI studies from 2020 to 2022 that deploy CNNs to find out how many of them use explainable AI methods for better understanding of CNNs and which such methods are used in particular. Our findings are that explainable AI methods were used in 13.7 percent of the surveyed publications, and the majority of the studies in which these methods were used employed the t-distributed stochastic neighbour embedding (t-SNE) method.
Indexed in Scopus / WoS
- 2021
Wearable Sensor Clothing for Body Movement Measurement during Physical Activities in Healthcare(opens in a new window)
A. Ancāns, M.Greitāns, R. Cacurs, B. Banga, A. Rozentāls
Sensors, Vol. 21 (6), p. 1 - 16, MDPI AG
Abstract
This paper presents a wearable wireless system for measuring human body activities, consisting of small inertial sensor nodes and the main hub for data transmission via Bluetooth for further analysis. Unlike optical and ultrasonic technologies, the proposed solution has no movement restrictions, such as the requirement to stay in the line of sight, and it provides information on the dynamics of the human body’s poses regardless of its location. The problem of the correct placement of sensors on the body is considered, a simplified architecture of the wearable clothing is described, an experimental set-up is developed and tests are performed. The system has been tested by performing several physical exercises and comparing the performance with the commercially available BTS Bioengineering SMART DX motion capture system. The results show that our solution is more suitable for complex exercises as the system based on digital cameras tends to lose some markers. The proposed wearable sensor clothing can be used as a multi-purpose data acquisition device for application-specific data analysis, thus providing an automated tool for scientists and doctors to measure patient’s body movements. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Indexed in Scopus / WoS · Q1/Q2 journal · SNIP: 1.555
- 2021
Wearable Sensor Clothing for Body Movement Measurement during Physical Activities in Healthcare(opens in a new window)
A. Ancans, M. Greitans, R. Cacurs, B. Banga, A. Rozentals
Sensors, Vol. 21 (6), p. 2068, MDPI
Abstract
This paper presents a wearable wireless system for measuring human body activities, consisting of small inertial sensor nodes and the main hub for data transmission via Bluetooth for further analysis. Unlike optical and ultrasonic technologies, the proposed solution has no movement restrictions, such as the requirement to stay in the line of sight, and it provides information on the dynamics of the human body’s poses regardless of its location. The problem of the correct placement of sensors on the body is considered, a simplified architecture of the wearable clothing is described, an experimental set-up is developed and tests are performed. The system has been tested by performing several physical exercises and comparing the performance with the commercially available BTS Bioengineering SMART DX motion capture system. The results show that our solution is more suitable for complex exercises as the system based on digital cameras tends to lose some markers. The proposed wearable sensor clothing can be used as a multi-purpose data acquisition device for application-specific data analysis, thus providing an automated tool for scientists and doctors to measure patient’s body movements.
Indexed in Scopus / WoS · Q1/Q2 journal · SNIP: 1.555
